NicoletFEAR/Steamworks-2017

Issues

• Test Tools for Final Robot and Meshbot

  #79 opened 8 years ago by iridiumalien
  0

• Clean up Code For Duluth

  #92 opened 8 years ago by Noah-Kennedy
  0

• Prepare Backup USB Stick

  #76 opened 8 years ago by Noah-Kennedy
  0

• Communication With Drive Team

  #104 opened 8 years ago by Noah-Kennedy
  0

• Fix Drive to Position

  #88 opened 8 years ago by Noah-Kennedy
  0

• Correct Autonomous

  #97 opened 8 years ago by Noah-Kennedy
  0

• Closed loop vision

  #96 opened 8 years ago by Noah-Kennedy
  0

• Left/Right Peg in Autonomous With NavX

  #105 opened 8 years ago by Noah-Kennedy
  0

• Test Limit Switch Code for Climber and Peg

  #95 opened 8 years ago by Noah-Kennedy
  0

• Tune PID and Fix Encoder Values

  #91 opened 8 years ago by Noah-Kennedy
  0

• prod bot encoder type

  #81 opened 8 years ago by richard-a-wood
  0

• Reconfigure IDs on Final Bot Cantalons

  #89 opened 8 years ago by Noah-Kennedy
  0

• Test Everything

  #90 opened 8 years ago by Noah-Kennedy
  0

• Determine IO Functions On Bot

  #52 opened 8 years ago by Noah-Kennedy
  0

• Everything is Awesome

  #78 opened 8 years ago by iridiumalien
  0

• Climbing Stops with Limit Switch

  #80 opened 8 years ago by Noah-Kennedy
  0

• Tune PID distance for final bot

  #50 opened 8 years ago by koritzinsky
  1

• Auto Calculations

  #60 opened 8 years ago by Noah-Kennedy
  0

• Test Vision Code on Meshbot

  #66 opened 8 years ago by Noah-Kennedy
  0

• Test Autonomous

  #75 opened 8 years ago by iridiumalien
  0

• Get Laptop Setup for Sussex

  #77 opened 8 years ago by Noah-Kennedy
  0

• Pack up for Competition

  #74 opened 8 years ago by koritzinsky
  0

• Make packing list for Sussex

  #73 opened 8 years ago by koritzinsky
  0

• Add brake code to PID

  #56 opened 8 years ago by Noah-Kennedy
  0

• Tune PID Position for MeshBot

  #48 opened 8 years ago by koritzinsky
  0

• Add stop conditions to PID

  #57 opened 8 years ago by Noah-Kennedy
  0

• Closed Loop Turn by Angle

  #47 opened 8 years ago by koritzinsky
  0

• Initial Climbing Code

  #43 opened 8 years ago by Wallace-Watler
  0

• Command Groups

  #62 opened 8 years ago by Wallace-Watler
  0

• Fix DriveToPosition

  #64 opened 8 years ago by Wallace-Watler
  0

• Sendable Chooser

  #63 opened 8 years ago by Wallace-Watler
  0

• Vision- Test if target is recognized (with retroreflective tape)

  #36 opened 8 years ago by koritzinsky
  0

• Vision Analysis

  #59 opened 8 years ago by Noah-Kennedy
  0

• Move vision code to subsytem

  #67 opened 8 years ago by Noah-Kennedy
  0

• Modify drive base for two speed controllers

  #46 opened 8 years ago by koritzinsky
  0

• Prevent Overshooting with NavX

  #32 opened 8 years ago by Noah-Kennedy
  2

• Fix Autonomous PID Code

  #28 opened 8 years ago by Noah-Kennedy
  0

• Add Front side switcher

  #37 opened 8 years ago by Noah-Kennedy
  0

• Intake and shoot commands

  #40 opened 8 years ago by Noah-Kennedy
  0

• Intake Subsystem

  #39 opened 8 years ago by Noah-Kennedy
  0

• Determine the formula for the Force for the touch plate

  #38 opened 8 years ago by koritzinsky
  0

• Configure and Document New Items

  #41 opened 8 years ago by Noah-Kennedy
  0

• Make Drawbridge subsystem and test command

  #42 opened 8 years ago by koritzinsky
  0

• Clean Up Vision Code

  #33 opened 8 years ago by Noah-Kennedy
  0

• Camera Spike

  #35 opened 8 years ago by Noah-Kennedy
  0

• Learn Git

  #34 opened 8 years ago by Noah-Kennedy
  0

• Add PID Comments and Parameters

  #29 opened 8 years ago by Noah-Kennedy
  0

• Arduino Spike

  #31 opened 8 years ago by Noah-Kennedy
  0

• NavX Spike

  #26 opened 8 years ago by Noah-Kennedy
  0

• Move example code from Vision Spike to Steamworks repository

  #27 opened 8 years ago by jkoritzinsky
  0