OpenStickCommunity/GP2040-CE

Issues

• I want to add a GRB LED on the pi, what should I do?

  #1013 opened 2 months ago by phucdat55
  1

• Keyboard Host - Pressing combinations of Left Alt, Left Ctrl, and Left Shift result in no inputs

  #1008 opened 2 months ago by InfraredAces
  0

• PS Touchpad coordinates on button presses as actions

  #924 opened 3 months ago by mikepparks
  1

• Keyboard Host - Unable to change input mode on boot using keyboard

  #1009 opened 2 months ago by InfraredAces
  0

• Macro - Hold Press + Input results in flickering input rather than continuously held input

  #976 opened 2 months ago by InfraredAces
  2

• Issue with rotatory encoders HW-040

  #998 opened 2 months ago by asturur
  1

• Keyboard mode does not work on MiSTer

  #1000 opened 2 months ago by TheTrainGoes
  1

• Feature Request: Allow tilt button to be used in macro or Allow tilt with another button assigned to one pin.

  #963 opened 3 months ago by Rmnesia
  1

• 8BitDo Keyboard wired or fob support for Keyboard USB Host add-on

  #995 opened 2 months ago by MukiEX
  5

• LED lights to turn off after a preset time when idle

  #991 opened 2 months ago by pokeshark
  1

• When pressing the right + DDI right keys at the same time, is it possible to clear the previous key?

  #993 opened 2 months ago by h-chwn
  2

• Changes in custom layout for the display don't update in real-time

  #965 opened 3 months ago by dangerousdonut
  4

• LCD timeout setting doesn't work in 7.8

  #961 opened 3 months ago by hctarks
  3

• Some screens do not work in 0.78 version

  #958 opened 3 months ago by wuxinygq
  11

• Unusual display configuration behavior after updating to 0.7.8

  #985 opened 2 months ago by H-Voltage
  4

• When using the analog joystick of the Switch joycon, you can't push it full, only half. Would like to add a calibration option for the maximum value of the analog stick.

  #973 opened 3 months ago by fatfatie
  5

• GPIO pins used for internal board functions are still mapable in the pin mapping page

  #981 opened 2 months ago by looper1234
  2

• Autocomplete half circle

  #983 opened 2 months ago by csaki
  1

• Latency test

  #968 opened 2 months ago by faluki1983
  1

• Unable to Save Changes After Deleting Line in Macro Configuration (0.7.8)

  #975 opened 3 months ago by brentaro
  0

• GP2040-CE 0.7.7 Oled screen configuration problem.

  #896 opened 3 months ago by TNiks
  3

• PWM Keyboard Output?

  #895 opened 3 months ago by DeadlyDad
  6

• Haute42 T13 often fails to connect to Xbox Series X

  #905 opened 3 months ago by CharliePRamsey
  13

• 7.8 RC1 Macro bug

  #930 opened 3 months ago by wesleysni
  4

• Macro frames bugs

  #960 opened 3 months ago by rebornsick
  10

• Stick display is flickering when neutral SOCD is active in 0.78

  #966 opened 3 months ago by renzeiron
  1

• Hope to add Left/Right Priority SOCD mode

  #951 opened 3 months ago by JJJY5
  4

• Function key shouldn't show up in Keyboard Mapping as it is not sent as an output

  #885 opened 3 months ago by artemis-u
  4

• Can't set color to function in custom theme page

  #927 opened 3 months ago by Pelsin
  0

• Haute42 g16 rgb led not working after reset

  #935 opened 3 months ago by DarkSim0
  1

• WebConfig - If B1 is pressed 10 times will cause the display to freeze and causes webconfig to become non-responsive

  #934 opened 3 months ago by InfraredAces
  2

• Changing display layout in web config doesn't update display while in preview mode (pressing B1)

  #874 opened 3 months ago by jack2game
  1

• Keyboard keys are not remamppable after PR #890

  #928 opened 3 months ago by octopuserectus
  2

• Hope to add Left\Right Priority SOCD mode

  #944 opened 3 months ago by JJJY5
  2

• The400 mini - is a configuration possible?

  #945 opened 3 months ago by lininjim2
  4

• Logitech pedal how to configure properly

  #948 opened 3 months ago by manotroll
  2

• No-Pin Assignment for Macros 1-6

  #932 opened 3 months ago by arntsonl
  1

• Add a Joystick Slider default to just use whatever is set in core, or remove the setting entirely

  #941 opened 3 months ago by bsstephan
  0

• saving changes being inconsistent for me (G16)

  #929 opened 3 months ago by LightningVoid
  0

• Cut off elements in Custom LED config page

  #897 opened 3 months ago by goblinpope
  2

• Turbo doesn't implement reinit(), won't work properly with profiles

  #918 opened 3 months ago by bsstephan
  0

• Turbo migration to GpioMappings needs to also migrate into profiles

  #916 opened 3 months ago by bsstephan
  0

• PROPOSAL: clear out the user config when we suspect the user is trying to recover from applying the wrong config

  #921 opened 3 months ago by bsstephan
  0

• Fn + Activator Button = Output Button, but cannot output long press

  #876 opened 3 months ago by jack2game
  4

• Github White Spaces Turned Off?

  #901 opened 3 months ago by arntsonl
  2

• How to compile the version of haute42 of 0.7.7?

  #902 opened 3 months ago by okabesg
  2

• Please Add Joystick Selection Slider shortcuts to hotkey options

  #888 opened 4 months ago by TheWarming
  4

• Button L2 adn R2 trigger button

  #884 opened 4 months ago by hermogenes12
  5

• Keyboard mode issue

  #882 opened 4 months ago by SpongeAlan39
  2

• Able to map GPIO pins to both inputs and display on newly flashed board

  #875 opened 4 months ago by InfraredAces
  1