PX4/PX4-Bootloader

Issues

• PX4 Autopilot on STM32h&57I-eval.

  #239 opened 3 months ago by MadhavParashar12
  0

• which file should I use when I use a stm32h7 board？

  #182 opened 4 years ago by XYvven
  17

• make[1]: Entering directory '/home/lanhuazhiyue/Bootloader/libopencm3' GENHDR include/libopencm3/

  #237 opened 3 months ago by lanhuazhiyue
  1

• mro_ctrl-zero-f7

  #234 opened 8 months ago by turboted
  0

• Question: Is secure boot working stably?

  #216 opened 3 years ago by divyanshupundir
  4

• kakutef7 mini

  #227 opened 2 years ago by kurosh-z
  1

• Bug: BOOT_DELAY_ADDRESS - wrong values for the F7 MCUs

  #184 opened 2 years ago by Igor-Misic
  0

• How to modify serial.c

  #223 opened 2 years ago by Lataileng
  0

• java upload example

  #34 opened 4 years ago by magicrub
  2

• Reserve Board ID 66

  #206 opened 3 years ago by auturgy
  3

• V5 Bootloader not working on newer Macs

  #181 opened 4 years ago by ryanjAA
  5

• PX4 v1.9.0 NOT GIVING SERVO OUTPUTS ON Cuav5+

  #196 opened 4 years ago by vineethtom
  4

• Feature request: Support SPRacingH7EXTREME target.

  #191 opened 4 years ago by hydra
  8

• bootloader's uart update is not ok

  #84 opened 4 years ago by yazhouren2012
  7

• Button management on TAP

  #59 opened 4 years ago by LorenzMeier
  5

• RCC Clock setup on F7 compilation not using OSC_FREQ

  #88 opened 4 years ago by ksschwabe
  5

• Robustify bootloader protocol

  #120 opened 4 years ago by RomanBapst
  2

• FMUv5 bootloader used the wrong status LED signaling.

  #121 opened 4 years ago by davids5
  1

• Invalid check in jump_to_app() for STM32F7 when using ITCM

  #126 opened 4 years ago by DrTon
  6

• Unable to flash bootloader

  #164 opened 4 years ago by ssnake
  1

• Error make Bootloader (Toolchain Windows 10)

  #160 opened 4 years ago by astekachev
  4

• FMUv5x/FMUv6 bootloader ITCM

  #131 opened 4 years ago by dagar
  3

• Board always stays in bootloader even when USB not connected

  #82 opened 4 years ago by ksschwabe
  13

• Consolidate user story / strategy on v2 flow bootloading

  #55 opened 4 years ago by LorenzMeier
  2

• Option "flto" the GCC.

  #38 opened 4 years ago by rydsfoz
  12

• Allow bootloader to flash the OTP

  #19 opened 4 years ago by LorenzMeier
  2

• Wireless bootloading

  #48 opened 4 years ago by LorenzMeier
  4

• Bootloader Usage

  #159 opened 5 years ago by davids5
  0

• Newest commit breaks FW upgrade on RDDRONE-FMUK66

  #149 opened 5 years ago by jarivanewijk
  2

• FMUv5 Bootloader in MP Firmware window do not boot up Firmware

  #125 opened 6 years ago by bys1123
  1

• Bootloader gets stuck in blocking_handler() when rebooted into bootloader from main application

  #81 opened 6 years ago by ksschwabe
  1

• Bootloader px4fmuv2 and px4io not working

  #114 opened 6 years ago by hamp1983
  1

• Make command doesn't run

  #111 opened 6 years ago by ThomasH3
  15

• Reboot -b cmd does not work on f7

  #99 opened 7 years ago by simonegu
  1

• add make auto dependencies

  #77 opened 7 years ago by davids5
  2

• mRo (AUAV) X-2.1 stuck in Bootloader

  #93 opened 7 years ago by tops4u
  4

• Does not work on STM32F7

  #87 opened 7 years ago by wenfenglin
  3

• vbus pin configuration disagree in bootloader and px4firmware

  #30 opened 8 years ago by KIrill-ka
  3

• Disable the AHB peripheral clocks

  #53 opened 9 years ago by liangzelang
  5

• Need a v5 release

  #57 opened 9 years ago by magicrub
  2

• Build Instruction link error

  #52 opened 9 years ago by imuguruza
  0

• Upload bootloader to px4fmu use DFU tools

  #28 opened 9 years ago by YuTingLiu
  1

• Expose the chip serial number in the bootloader

  #20 opened 9 years ago by LorenzMeier
  2

• Add Pixhawk+ ID to boot loader and prevent boots if silicon rev < 3 on the FS peripheral

  #43 opened 9 years ago by LorenzMeier
  14

• Low Input on SBUS/PPM/PA10 Causes Stuck Bootup on PX4-V1

  #50 opened 9 years ago by ethomas997
  2

• BOARD_FORCE_BL on FMUv4 breaks ESC calibration

  #46 opened 9 years ago by tridge
  2

• firmware update via UART

  #33 opened 9 years ago by magicrub
  3

• Pixhawk firmware update via UART

  #35 opened 9 years ago by squilter
  2

• Bootloader will not jump to app

  #27 opened 10 years ago by ksschwabe
  3

• the px4flow board load px4flow_bl.bin in Bootloader,This problem occurs for ""USB device not recognized" ,is the problem jump to app?

  #29 opened 10 years ago by molyswu
  4