Is it possible give the power input 19v 4.5A on Open CR?
Opened this issue · 1 comments
fuad99 commented
i have power issue with Open CR and Dynamixel, every Dynamixel is on, the power on Open CR is dropped to 8v and make Open CR is resetting. Any Soultion?
Thanks very much!
ROBOTIS-Will commented
Please be aware that OpenCR does not regulate the input voltage to DYNAMIXEL port.
If you connect 19V to the input port, DYNAMIXEL will receive the same voltage which may damage the product if you are using 12V models.
Depending on the number of DYNAMIXEL connected to the OpenCR and the power source you use, voltage drop may occur.
Please try connecting the proper power source directly to DYNAMIXEL to avoid voltage drop from high current required application.
Thank you.