Issues
- 1
error saat menyalakan power pada servo dinamixel
#127 opened by YokeMikal - 2
- 1
Control Item was not found on op3_manager
#113 opened by NurAlif - 0
- 1
a
#123 opened by ROTAMA-POLINEMA - 0
balance control after modifying some part
#124 opened by luthfai - 0
[RobotisController] first bulk read fail!!
#122 opened by wisnuputrawardana - 1
question about torque limits of OP3 motor
#121 opened by yuan0623 - 1
How to let the op3 raise raise hand when walking.
#120 opened by leongsheng - 1
Can't open action editor
#119 opened by leongsheng - 2
OP3 Online Walking on Gazebo: RLEG IK ERR
#95 opened by tahara-codes - 0
op3 goes into a relaxed position using robotis_controller not direct controller for my walking algorithm
#118 opened by aysegulucar - 13
The Robotis OP3 has a stuttering on his servo
#115 opened by dnovx - 1
- 21
After over 5 months of working with my OP3 like-setup, I am getting an error right after the dynamixels flash.
#114 opened by Smitty-44 - 1
Asking about the dynamics of the robot
#116 opened by duckykao - 4
- 1
Action module can't play step
#112 opened by fuad99 - 1
Power SMPS for OP3
#111 opened by waktep - 21
Not really an issue. Can I substitute a Pi4 for the NUC? If yes, what would that require?
#105 opened by Smitty-44 - 6
how to change the frame of the robot's leg?
#109 opened by tzf230201 - 2
There is process dying problem.
#110 opened by hjj0525 - 2
UPDATE ROS DISTRIBUTION FOR ROBTIS OP3
#108 opened by emrahaslan33 - 1
Walking Speed increased in OP3 Soccer Demo
#106 opened by lachg258 - 1
Gazebo SImulation Problem
#107 opened by full0134 - 9
Why can't I find this file?
#104 opened by Echo334 - 2
Add Dynamixel 2XL430-W250-T
#102 opened by fuad99 - 4
Additional Configuration for Custom OP3
#101 opened by luqmansen - 2
op3_walking_module
#93 opened by AbbasJ93 - 2
CAD files for OP3 are missing
#92 opened by robotiscustomer - 3
walking code
#91 opened by AbbasJ93 - 2
3.5mm jack as input
#90 opened by waktep - 2
line detection for sprint
#89 opened by farhanc4kra - 2
Walking program
#88 opened by fuad99 - 4
op3/both walking and grasping
#87 opened by xxchenchen - 4
op3 synchronize motion with bluetooth data
#80 opened by waktep - 2
Forse Sensor
#79 opened by Nara0731 - 4
Create new motion and play it continously
#78 opened by fuad99 - 2
- 24
NUC
#94 opened by robotiscustomer - 2
usb recovery can't work
#100 opened by fuad99 - 2
Can Ichange OpenCR1.0 with Opencm9.04?
#99 opened by ahmaddidiks - 2
Issue running op3_bringup
#98 opened by lachg258 - 2
How long does a fully charged OP3 last?
#96 opened by robotiscustomer - 3
Converter TTL to RS485 for dynamixel
#103 opened by fuad99 - 5
question about lateral balance
#86 opened by yuan0623 - 2
- 5
- 4
can I directly control the torque of the joints?
#83 opened by yuan0623 - 2
get position and orientation
#82 opened by Jiangyancao