Slamtec/rplidar_ros

Issues

• Wrong data from rplidar s2 when the lidar is going near a obstacle

  #156 opened 25 days ago by tanmayrspace
  0

• S2 - Error, RPLidar internal error detected. Please reboot the device to retry

  #152 opened 9 months ago by CycleMark
  2

• RpLidar s2 Error, rplidar internal error detected. Please reboot the device to retry.

  #87 opened 2 years ago by vivekmange56
  12

• Number of LIDAR data points inconsistent

  #104 opened 2 years ago by agross12
  1

• ROS2 No Scan Data, incorrect sample rate with S3 lidar

  #155 opened 2 months ago by dsoltis3
  1

• Building a workspace with with rplidar_ros causes the OS to freeze

  #154 opened 3 months ago by Vifirisya
  0

• Auto motor standby / stop does not work at boot

  #151 opened 10 months ago by hilary-luo
  1

• Error, unexpected error, code: 80008004

  #148 opened 10 months ago by Vicenbs
  12

• Compatibility of Rplidar A1M8 with Ubuntu and raspberry Pi

  #153 opened 6 months ago by Ahmad27055
  0

• Can not start scan: 80008002!

  #86 opened 2 years ago by M8ias
  6

• error, operation time out. SL_RESULT_OPERATION_TIMEOUT!

  #149 opened 10 months ago by HYEON073
  1

• How to configure RPLidar S3 to publish measurements at 20Hz?

  #150 opened 10 months ago by wette
  0

• Error, cannot retrieve rplidar health code: 80008000

  #133 opened a year ago by wsung1
  3

• [slamware_ros_sdk_server_node-2] process has died, wen settting 2D bay goal in slamware_ros_sdk/slamware_ros_sdk_intergated_with_teb.launch

  #147 opened 10 months ago by ryujou
  0

• RPLIDAR S2 UART (not using USB Adapter)

  #143 opened a year ago by NeighborDva
  3

• How to change s2 LiDAR vertical angle?

  #146 opened a year ago by robotdevel
  0

• rplidar_node component is no more being registered

  #139 opened a year ago by db-nvent
  0

• RPLiDAR Node Crashes with `std::bad_array_new_length`

  #136 opened a year ago by grwells
  1

• Lidar process dying in ros2

  #138 opened a year ago by sardanian
  6

• [ROS 2] RPLiDAR A1 auto standby not working properly

  #137 opened a year ago by jarkenau
  0

• Motor does not stop (auto or using service)

  #129 opened a year ago by hilary-luo
  0

• catkin_make errors

  #132 opened a year ago by r8drfn89
  9

• can't setup the rplidar_ros package on ros1 melodic

  #131 opened a year ago by tx871217
  1

• Buffer overflow detected for testing RPLIDAR A1M8 sensor

  #118 opened a year ago by AdrianUIC
  2

• Current Package Not In Rosdep

  #128 opened a year ago by brianabouchard
  2

• Lidar A2M12 - Error, operation time out. RESULT_OPERATION_TIMEOUT!

  #110 opened a year ago by jayro-zaid
  6

• udev rule for multiple rplidar

  #124 opened a year ago by simonbogh
  1

• Is service `/stop_motor` implemented for ROS 2 branch?

  #125 opened a year ago by royito55
  0

• How to change default IP of Rplidar S2E

  #121 opened a year ago by raviparmar11
  5

• cannot read valid scan_mode by startScan for rplidar a1

  #123 opened a year ago by lwcode
  0

• Want to run remotely

  #119 opened a year ago by nd013
  1

• RPLIDAR_S1 ROS2 start_motor stop_motor not working

  #88 opened a year ago by kadlu
  1

• NVidia Nano and R2 doesn't work. Does R2 even work with ARM?

  #90 opened a year ago by jcrupi
  1

• sudo chmod 777 /dev/ttyUSB0 就是串口没有权限，串口文件根据你自己的修改

  #93 opened a year ago by girbish2
  4

• RP Lidar S2 ERROR (Linux & Windows)

  #107 opened a year ago by AnOrdinaryUsser
  3

• Model A2M12

  #105 opened a year ago by rootes1725
  2

• Process has died (Exit code -6)

  #102 opened a year ago by yaxsomo
  1

• RPlidar S2E "Error, operation time out. RESULT_OPERATION_TIMEOUT!" error

  #109 opened a year ago by hsynklceng
  4

• Make error Ubuntu 22

  #96 opened a year ago by msent27
  1

• Ros2-Humble Support missing

  #91 opened a year ago by aagrawa3-dev
  3

• When I was compiling the rplidar_ros, the following error occurred

  #111 opened a year ago by ddwy
  1

• warning：编译警告

  #113 opened a year ago by deyouslamtec
  0

• Hello SLAMTEC

  #100 opened a year ago by robotdevel
  2

• Unable to launch rplidar_s2.launch

  #106 opened 2 years ago by AnOrdinaryUsser
  1

• Rplidar Node exit code -11

  #97 opened 2 years ago by lam4562311
  2

• Distorted scan data in S2

  #103 opened 2 years ago by fig-shimooka
  0

• [rplidar navigation] /scan topic comes from a camera node rather than the desired LiDAR node

  #99 opened 2 years ago by LightwishWONG
  0

• Lidar circuit got damaged

  #98 opened 2 years ago by federista
  0

• cp210x issue wirh rplidar A1

  #95 opened 2 years ago by tugbakara
  0

• RPLIDAR A2 Mapping Issue

  #89 opened 2 years ago by phoenixrider12
  1