VoronDesign/Voron-Stealthburner

Issues

• Dragon CW1 Rear missing?

  #146 opened 19 days ago by Dreded
  1

• printhead STL for Phaetus Dragon needs manual modification after printing

  #139 opened 6 months ago by SebKuzminsky
  1

• Stealthburner for Rapido 1 CAD hotend mounting holes mistake

  #143 opened a month ago by cromine11
  0

• Incorrect screws used in manual for mounting CW2 to the carriage

  #144 opened a month ago by NokkOnEffect
  0

• Release STL for stealthburner main body is the wrong file

  #141 opened 5 months ago by kurtjcu
  2

• Mounting screws are too short

  #142 opened 4 months ago by cmezh
  1

• Wrong files

  #140 opened 6 months ago by Aleksbbgk
  2

• Hotend Request - Spider V3

  #138 opened 6 months ago by Fionoz
  0

• Stealthburner Clockwork 2 Bowden Manual

  #136 opened 7 months ago by Puche
  0

• Toolhead Request for CR10 hotend clone

  #135 opened 7 months ago by SonOfSardaar
  0

• Which stl model is used for this hot end? I didn't find it.

  #134 opened 8 months ago by tianyi725
  2

• Assembly aids clarification for the SB manual

  #129 opened a year ago by FreeWilly2022
  1

• optimize orientation for phateus rapido v2 plus

  #133 opened 9 months ago by Avatarsia
  1

• Clockwork2: CAD / STL has insufficient tolerances - not printable.

  #132 opened 9 months ago by dmradford
  3

• Rapido 2 Toolhead: Orientation in README.md not correct.

  #124 opened a year ago by Laikulo
  3

• Missing main body CAD

  #131 opened 10 months ago by Garethgb
  2

• Setup of Tension Knob and Anti Squish Thingymajig are not documented

  #130 opened a year ago by dekay
  0

• Rapido 2.0 thermistor wires block SB

  #116 opened a year ago by gizzygizmo
  17

• Lubrication Clarification for SB Manual

  #127 opened a year ago by dekay
  0

• No Issue just a question.

  #125 opened a year ago by Shakablestew
  0

• Part cooling is not symmetrical (X-axis)

  #107 opened a year ago by maxim-kukushkin
  8

• Cooling related probloms with the Phaetus dragon SF and (Possibly) HF

  #123 opened a year ago by Nathan22211
  0

• part cooling issue with E3D V6 and Dragon HF

  #122 opened a year ago by bartoszwas
  0

• Can Voron0.2 replace to SB

  #121 opened a year ago by thiesymon
  1

• Tiny typo: psecific

  #117 opened a year ago by atoomnetmarc
  1

• Missing folder x-carriage

  #111 opened a year ago by DirkS2106
  2

• Divert airflow away from extended meltzone on Dragon HF.

  #110 opened a year ago by mggevaer
  1

• CW2 motor plate and main body don't match

  #102 opened a year ago by actualbigbobin
  1

• Additional missing files

  #108 opened a year ago by VoronManiac
  4

• Y-Motor assembly, cad, screw length, skirts

  #109 opened a year ago by grungywamp
  0

• Gap in newly filled area in CW2 motor plate

  #106 opened a year ago by jagerman
  0

• Heat break curling issue

  #105 opened a year ago by Fuechsl
  0

• Filename change on manual pdf breaks link on vorondesign.com

  #103 opened a year ago by akonkol
  1

• Update 14h ago accidentally removed shroud

  #100 opened a year ago by Marshalldog
  3

• X Carriage Hardware

  #99 opened a year ago by 1John419
  3

• Is the CW2 extruder configuration not provided?

  #93 opened a year ago by garyd9
  1

• Wrong issues link in manual

  #94 opened a year ago by Jrribas
  2

• Main Body sliced wrong

  #92 opened 2 years ago by Steven2k6
  1

• Phaetus Rapido Printhead Readme/BOM lists Wrong Screw Size

  #89 opened 2 years ago by SuperDodge
  2

• 2023-05-05 high contrast pdf is same as standard pdf

  #90 opened 2 years ago by dwalls70
  1

• TOOL CARTRIDGE Screws (Page 41)

  #77 opened 2 years ago by SharkyMoto
  3

• ADXL Mount, mounting screws to Toolhead (Page 69)

  #80 opened 2 years ago by SharkyMoto
  1

• Page 61 screw image does not match label

  #83 opened 2 years ago by nemgrea
  1

• Part "pcb_spacer" and the two related screws not in manual

  #85 opened 2 years ago by miracuruzrh
  4

• Rapido instruction please add viewpoint to supported orientation

  #84 opened 2 years ago by Fuechsl
  1

• Requesting to add Macro for [gcode_macro set_logo_leds_on]

  #86 opened 2 years ago by M3HNGRY
  0

• Part cooling fan - unbalanced airflow

  #82 opened 2 years ago by btthrt
  6

• ERCF Compatibility with ClockWork 2

  #78 opened 2 years ago by ccfman2004
  1

• Dragon STL Issue

  #79 opened 2 years ago by kogdog
  2

• CW1 pcb cover support for lgx (non lite)

  #76 opened 2 years ago by MrBlackmidi
  0