WangXuan95/FPGA-USB-Device
An FPGA-based USB 1.1 (full-speed) device core to implement USB-serial, USB-camera, USB-audio, USB-hid, etc. It requires only 3 FPGA common IOs rather than additional chips. 基于FPGA的USB 1.1 (full-speed) device端控制器,可实现USB串口、USB摄像头、USB音频、U盘、USB键盘等设备,只需要3个FPGA普通IO,而不需要额外的接口芯片。
VerilogLGPL-2.1
Issues
- 0
Parameter in usbfs_bitlevel.v
#25 opened by tuandat2206 - 2
Great code, one question
#20 opened by rjacobs1969 - 3
USB differential benefits
#24 opened by TheAnimatrix - 2
求比特位边缘检测信号快慢原理,dpv信号为什么能代表j信号的原理
#16 opened by XHX00008888 - 1
USB Spec Version
#23 opened by vahab-gh - 1
- 2
Device Descriptor Request Failed
#21 opened by Long-Tam - 4
- 2
License missing
#13 opened by jankralx - 1
a Question and issue
#18 opened by vahab-gh - 2
USB Low-Speed support?
#17 opened by epsilon537 - 0
Would you provide firmware about usb device?
#15 opened by bigdot123456 - 0
- 3
- 1
USB主时钟可以做48MHz的吗
#11 opened by wwjabc - 15
Device descriptor request failure
#10 opened by lk-davidegironi - 1
Computer connection
#9 opened by ExcielAT - 3
systemverilog转换到 verilog问题
#7 opened by 1847123212 - 2
每个example占用的fpga资源方不方便给一个表?
#6 opened by 1847123212 - 0
您好,方便发个邮箱吗?
#5 opened by 498409735 - 6
IP core integration with Nios II
#4 opened by ExcielAT - 2
语法不严谨?导致综合出错
#1 opened by xiaowuzxc