dusty-nv/jetson-reinforcement

Issues

• Supported platform

  #47 opened 4 years ago by newtype0123
  7

• Makefile:83: recipe for target 'all' failed

  #46 opened 4 years ago by oustegn
  0

• Building from Source fails

  #45 opened 5 years ago by sdk777
  1

• xavier support?

  #34 opened 6 years ago by WERAQS
  5

• torch7 move to ATen?

  #43 opened 5 years ago by peepo
  2

• c++ wrapper pyimport

  #11 opened 7 years ago by reinaldomaslim
  3

• Segmentation Fault - C++ wrapper - dqnAgent

  #22 opened 6 years ago by lfelipesv
  2

• Error running catch executable

  #42 opened 5 years ago by brunoeducsantos
  0

• problem building pytorch with jetson tx2

  #31 opened 6 years ago by phojjat
  7

• Issue compiling in Jetson TX2

  #41 opened 5 years ago by brunoeducsantos
  0

• Error Jetson nano to launch gym-DQN.py

  #39 opened 6 years ago by 8BitsCoding
  0

• Error with Jetson Nano

  #38 opened 6 years ago by TacHuynh
  1

• run ./gazebo-arm.sh

  #37 opened 6 years ago by XinghuiTao
  0

• CMakePreBuild.sh

  #36 opened 6 years ago by AndreV84
  0

• opencv luarocks install camera

  #35 opened 6 years ago by AndreV84
  0

• I need pytorch == 0.3.1

  #33 opened 6 years ago by jiangyuhe123
  0

• Patches needed to make this work on L4T 4.4.38-tegra

  #32 opened 6 years ago by chrislgarry
  1

• how to install jupyter notebook in jetson TX2?

  #21 opened 6 years ago by dltmdwls25
  4

• Issue with building pytorch for jetson tx1

  #10 opened 7 years ago by cjbarb7
  4

• jetson-reinforcement/build/pytorch/torch/_thnn/utils.py:1: RuntimeWarning: Parent module 'torch._thnn' not found while handling absolute import

  #30 opened 6 years ago by yulivee
  0

• CUDA too many resources

  #28 opened 6 years ago by dan9thsense
  0

• Only for TX2? Can i install on TK1?

  #27 opened 6 years ago by Bernal-R
  0

• When I make this code , there is some err that I can not work it out .

  #16 opened 7 years ago by yi2ha
  2

• How to install conda in TX2?

  #26 opened 6 years ago by cshreyastech
  0

• Error running the Gazebo Arm example

  #24 opened 6 years ago by shivangg
  2

• Loading Robotic Arm Agent

  #23 opened 6 years ago by dokeash
  1

• Questions About Robotic Arm 3D Simulation

  #20 opened 6 years ago by jshelata
  0

• OSE ERrror with BipedalWalker After correctly running

  #19 opened 6 years ago by aysegulucar2016
  1

• Before your installation steps, Should I install ROS, gazebo, gym, and even pip?

  #18 opened 7 years ago by aysegulucar2016
  2

• tx2 and jetpack 3.2.1

  #17 opened 7 years ago by aysegulucar2016
  0

• cmake ../

  #15 opened 7 years ago by aysegulucar2016
  2

• Does not compile with Gazebo 9

  #14 opened 7 years ago by mhubii
  1

• run "./gazebo-arm.sh", error raised, "This program requires version 3.5.0 of the Protocol Buffer runtime library"

  #13 opened 7 years ago by ababycat
  0

• make error

  #12 opened 7 years ago by ababycat
  1

• Makefile:83: recipe for target 'all' failed

  #9 opened 7 years ago
  0

• Fails after gazebo robotics simulator with unexpted operator

  #8 opened 7 years ago by piexil
  0

• python gym-DQN.py => RuntimeError: torch was compiled without numpy support

  #6 opened 7 years ago by TheRobotStudio
  3

• deepRL-console (python)

  #5 opened 8 years ago by LaiAmy
  2

• 'Failed to load function from bytecode:' Error while loading model file

  #4 opened 8 years ago by ShreyasSkandan
  1

• error: unknown type name ‘ptrdiff_t’

  #2 opened 8 years ago by gwljf
  6

• OpenBLAS error JetPack 2.3

  #3 opened 8 years ago by pythonanonuser
  1

• Jetpack 2.3

  #1 opened 8 years ago by S4WRXTTCS
  21