kriswiner/MPU6050

Issues

• Direction for the compass inside Ublox M8N Gps.

  #58 opened 5 months ago by saumik02
  8

• icm 20948 wake on motion interrupt

  #42 opened 5 years ago by NIIHARIKARAVIPROLU
  1

• LSM9DS1 vs. MPU-9250 vs. BMX055

  #6 opened 10 years ago by maziarzamani
  238

• does calibrateMPU6050 method push biases to hardware register?

  #57 opened 2 years ago by audi0615
  4

• MPU6050 Calibrated Acc and Gyro in different measurement range

  #56 opened 3 years ago by williamesp2015
  2

• Good job. Is your libary maintained yet?

  #55 opened 3 years ago by f41ardu
  3

• Problem with continues reading FIFO

  #54 opened 3 years ago by williamesp2015
  2

• fifo_count is always 8 after 80 msec @1K hz

  #53 opened 3 years ago by williamesp2015
  0

• Question : Teensy 3.1 *2 more power than >> Stm32F401

  #52 opened 3 years ago by JPB1JPB1
  1

• Initial accelerometer calibration

  #38 opened 6 years ago by Civilduino
  46

• Calibration Function

  #47 opened 4 years ago by NadaSaad-D8
  6

• Calibration values question

  #19 opened 7 years ago by jc508
  9

• MPU6050IMU.ino accelerometer offset - temperature compensation bit

  #8 opened 4 years ago by huirad
  7

• Reason behind not using the interrupt functionality?

  #21 opened 4 years ago by barafael
  1

• Madgwick Quaternions without accelerometer data

  #50 opened 4 years ago by intensite
  3

• Self test

  #11 opened 9 years ago by blschreiner
  14

• who_am_i giving register giving random address

  #49 opened 4 years ago by sajalbhargava
  1

• offset increasing

  #48 opened 4 years ago by yousefkhaled1750
  3

• Not sure how to compile successfully for Teensy 4.0.

  #46 opened 4 years ago by AdamMarciniak
  1

• Using the libriary in a NUCLEO-F746ZG and MBED?

  #45 opened 5 years ago by josb86
  1

• How to produce the Mxy Mxz Myz point picture?

  #44 opened 5 years ago by FN0005
  6

• Calibration question

  #43 opened 5 years ago by DanLeCornu
  2

• InvenSense ICM-20948 DMP Flash error

  #30 opened 7 years ago by zq649
  11

• Magnetometer calibration expected result could not achieved

  #41 opened 6 years ago by DavidKric
  1

• doing fusion oupdates with no new data

  #13 opened 9 years ago by manitou48
  4

• Accel Bias

  #16 opened 7 years ago by PierreGogendeau
  6

• Merge the two projects: Aritro Mukherjee and yours

  #40 opened 6 years ago by fqantonio
  1

• FIFO_R_W

  #39 opened 6 years ago by KannanNatesh
  7

• magnetic calibration

  #37 opened 6 years ago by mbui0327
  9

• Pb with self-test

  #36 opened 6 years ago by jmcornil
  3

• 【question】 the value of acce dont change

  #35 opened 6 years ago by xinlnix
  2

• seek help：how can i get the angle without using Arduino

  #34 opened 6 years ago by Tednsn
  4

• Implement calibrations of Magnetometer

  #33 opened 6 years ago by Electricaz
  2

• [Question] how to compute relative position (vector) with sensor fusion?

  #31 opened 7 years ago by gotgot1995
  4

• Sensor Temperature Compensation

  #32 opened 7 years ago
  2

• Magnetometer raw data issue

  #18 opened 7 years ago by proba238
  11

• convert it a library

  #26 opened 7 years ago by MohamedA95
  4

• Help with magnetometer calibration

  #25 opened 7 years ago by alecalvo03
  1

• pitch and roll variation

  #24 opened 7 years ago by hassankord
  2

• A question about magnetometer calibration and calibration values.

  #20 opened 7 years ago by Lacdires
  12

• Strange reset behaviour

  #23 opened 7 years ago by Yury-MonZon
  2

• About automatic calibrations of magnetometer

  #17 opened 7 years ago by ijunglee
  4

• Comsuption

  #15 opened 7 years ago by clemaitre58
  7

• About the Hard and Soft-Iron Calibration

  #14 opened 8 years ago by ijunglee
  2

• 1kHz IMU for Google Cardboard ?

  #12 opened 9 years ago by motorsep
  4

• Broken link previews

  #10 opened 9 years ago by shukmeister
  2

• MPU9250 ODR

  #9 opened 9 years ago by MauroMombelli
  14

• images

  #7 opened 9 years ago by kriswiner
  22

• Magnetic Distortion Compensation

  #4 opened 10 years ago by zephyrr
  2

• Thank you! You're awesome!

  #3 opened 10 years ago by ohcolinho
  1