Issues
- 0
no issue / ideas only
#80 opened by MyRaspberry - 0
111
#79 opened by Jung901011 - 0
- 1
Duplicate state after updating measurement
#76 opened by mungewell - 2
Improve tests
#70 opened by m-lundberg - 2
- 0
Documentation update
#74 opened by m-lundberg - 1
output the control errors
#73 opened by hess8 - 2
- 1
Allow to specify last_output at PID creation
#43 opened by Steinarr134 - 1
- 6
MicroPython Port.
#64 opened by beyonlo - 1
Drop Python 2.7 and <3.6 support?
#57 opened by rnestler - 1
Time module / micropython running on Pi Pico
#67 opened by tuemar - 2
Run mypy in CI
#52 opened by m-lundberg - 2
Integral windup problem
#38 opened by imanfreeman - 2
- 3
Document reverse acting control using simple_pid
#58 opened by kjkoster - 0
Implementation is incorrect
#66 opened by datonefaridze - 2
No module named simple_pid
#13 opened by piku107 - 2
Add more examples
#28 opened by m-lundberg - 1
- 3
- 2
Question: how to incorporate a slew rate?
#45 opened by kratsg - 1
what is the controlled system?
#36 opened by yuxiazff - 1
Question about PID output
#33 opened by kratsg - 2
port to CircuitPython
#32 opened by mgenova79 - 1
DC Servo Motor position control with an implemented Fuzzy-PID Controller using Raspberry Pi Pico
#47 opened by Nmsngym - 1
Rename PID module
#53 opened by m-lundberg - 2
mypy error simple_pid/PID.pyi:45: error: Name "output_limits" already defined on line 17
#50 opened by rnestler - 0
- 0
adding a filter to derivative term
#44 opened by CamDavidsonPilon - 3
Is it possible to use variable inputs?
#42 opened by jwagn96 - 1
PID setpoint not in PID.pyi
#35 opened by jamesbraza - 1
tag next version?
#34 opened by frantisekbrabec - 1
- 5
- 0
Use output_limits setter in __init__() rather than setting the elements manually
#25 opened by m-lundberg - 4
- 1
Higher order discretizations [Enhancement]
#24 opened by bpfel - 2
Setting set point with in a range.[Question]
#23 opened by mmkumr - 2
usage question
#20 opened by HaroldSP - 4
- 6
- 2
restarting the PID from an interrupt
#12 opened by brianjmurrell - 2
Question: Positive/Negative outputs
#11 opened by bluckau - 5
Proportional on measurement
#8 opened by Feargus - 1
ZeroDivisionError: float division by zero
#5 opened by groverdivas - 4
Auto_Mode toggling causes disturbance
#3 opened by james0807 - 3
Tracking and output of PID terms to PV
#2 opened by G00364778