nasa-jpl/open-source-rover

Issues

• PCB readme Female/Male Header is ambiguous

  #489 opened 2 months ago by Secret-Asian-Man
  0

• Hard to notice OnShape model + Slack community link on REAMDE

  #484 opened 2 months ago by ldang
  1

• Section 4.5 of PCB assembly instructions is a little confusing

  #482 opened 2 months ago by ldang
  1

• Are urdf files available for the rover? Gazebo simulation?

  #481 opened 3 months ago by Mechazo11
  1

• Update docs to use new bearing

  #480 opened 5 months ago by abust005
  3

• Disconnect LEDs that are always on when battery is connected, even when rover power switch is off

  #472 opened 7 months ago by apollokit
  0

• Update standoffs in PCB assembly documentation and BOM

  #451 opened 10 months ago by apollokit
  1

• MotionStudio instructions don't mention velocity calibration

  #456 opened 9 months ago by Achllle
  0

• Update the readthedoc Python version

  #473 opened 7 months ago by robrussell
  0

• No part numbers for Molex 6-pin connector

  #475 opened 7 months ago by robrussell
  0

• goBilda 1514-0010-0060 spacer discontinued

  #469 opened 7 months ago by robrussell
  1

• Update digikey BOM to use actual ref designators as "Customer Reference" field instead of current UIDs

  #450 opened 10 months ago by apollokit
  0

• PCB build instructions use part references that are only documented on google sheets

  #443 opened 7 months ago by Achllle
  3

• Battery protection circuitry

  #429 opened a year ago by abust005
  2

• Different wire-to-board connection for corner servos

  #431 opened a year ago by abust005
  5

• Update or remove optional_cad_parts

  #468 opened 8 months ago by Achllle
  0

• Mkdocs warnings

  #467 opened 8 months ago by Achllle
  0

• Git repo history is large, consider recommending --depth 1

  #464 opened 8 months ago by robrussell
  2

• OSR MBSE Model

  #463 opened 8 months ago by PhilCarPi
  0

• Rocker-bogie joint should use bushings instead of bearings

  #459 opened 9 months ago by Achllle
  0

• Discrepancy in Roboclaw setup vs configuration in config

  #447 opened 9 months ago by ericjunkins
  4

• Typo in the parts_list.csv file

  #445 opened 10 months ago by UTNAK
  0

• Complete or remove TODOs in PCB build instructions

  #444 opened a year ago by Achllle
  0

• 3D Model Files for Parts

  #440 opened a year ago by RobotLAB123
  5

• NASA火星车

  #439 opened a year ago by tolin1420
  0

• 404 on Read the docs site

  #435 opened a year ago by ericjunkins
  2

• Fix github actions: mkdocs update for v2

  #418 opened a year ago by Achllle
  1

• Checklist version of the parts List

  #428 opened a year ago by ldang
  1

• Open source rober

  #426 opened a year ago by arifmd036
  0

• 404 for 2D DFX files on both master and branch

  #422 opened a year ago by sk19810
  2

• Miscount of 1106 square beams

  #421 opened a year ago by abust005
  1

• Inconsistent license

  #412 opened a year ago by dkogan
  3

• Website `opensourcerover.jpl.nasa.gov` is down

  #413 opened a year ago by maheshrijal
  9

• Fix github actions: update generated files action doesn't work properly

  #419 opened a year ago by Achllle
  0

• Custom PCB instructions missing

  #415 opened a year ago by karbak
  1

• Reference CAD location in Parts List for 3d printed parts

  #349 opened a year ago by JoshSharpe
  2

• JST-XH connectors not included in BOM or instructions for GoBilda encoder connections

  #354 opened a year ago by Achllle
  3

• [Bug Report] PCB Assembly Readme.md: Controller Board's JST connector needs to be connected backwards

  #375 opened a year ago by SallyTYT
  7

• [Bug Report] S50 (3D Printed PVC Clamping Hub (bottom)) is not recorded in the master_parts_list_raw.csv

  #376 opened a year ago by SallyTYT
  1

• Wheel assembly picture update required

  #357 opened a year ago by Achllle
  4

• [Bug Report] There is a problem with the location of the holes in the drawing for S35 (top_plate_baseline.dxf)

  #377 opened a year ago by SallyTYT
  1

• Digikey Bill of Materials file missing

  #386 opened a year ago by 0x786d
  1

• Request, Alternative Motor Driver?

  #348 opened 2 years ago by BerkayCinar
  2

• Filament bestellen

  #385 opened 2 years ago by Debkou
  0

• 3D-Druck

  #384 opened 2 years ago by Debkou
  1

• Format Markdown

  #362 opened 2 years ago by sethfischer
  1

• Jpl

  #364 opened 3 years ago by Vivsangel
  1

• S37 4.5" x 12" Aluminum Plate - Part #585004 has been discontinued by Servocity

  #350 opened 3 years ago by JoshSharpe
  0

• Request, Alternative Clamping Hub

  #352 opened 3 years ago by N3M094
  1

• Fix Kitspace BOM Arduino shield connector J1

  #341 opened 3 years ago by sethfischer
  0