patrickcollins12/esphome-fan-controller

Issues

• error: operation on 'write_val' may be undefined [-Werror=sequence-point]

  #38 opened 2 months ago by tuplink
  1

• Bin file

  #37 opened 3 months ago by weske2000
  1

• Can I do this project with a fan control with potentiometer?

  #31 opened 3 months ago by decorsodario
  1

• Must add platform: esphome under ota in yaml

  #36 opened 3 months ago by jrichey25
  1

• Improvments and toughts regarding wiring, components, temperature-sensors and fan min_power

  #35 opened 3 months ago by zeus86
  3

• Additional fans

  #22 opened a year ago by B08Z
  10

• make fan stop spinning at zero

  #17 opened 2 years ago by sobrarbe
  71

• ESP32 Mini + box

  #34 opened 5 months ago by mainmind83
  2

• 2 powers Input (5v & 12v) [ QUESTION ]

  #33 opened 5 months ago by PaulBiod
  3

• DHT11 temperature stops updating periodically

  #28 opened a year ago by chrispontiga
  6

• min_power and max_power from input field

  #32 opened 6 months ago by nebula7219
  5

• Two Sensors

  #27 opened a year ago by theblujuice
  3

• 3 wire fan

  #30 opened 8 months ago by alfadex
  3

• Fan Override does not work

  #8 opened 2 years ago by TheDK
  19

• Need advice: Still high temps. What RPM is good?

  #29 opened a year ago by plimmplamm
  1

• constantly reboots

  #26 opened a year ago by Bond246
  13

• Manual and thermostat fan control

  #25 opened a year ago by KHWSommer
  1

• Fritzing Img ESP Pinouts?

  #24 opened a year ago by bfleg
  4

• question about external temperature instead of built in dht

  #23 opened a year ago by homonto
  1

• [Request] Possible to use two temperature sensors?

  #5 opened 2 years ago by martijn-brant
  6

• LED strip control

  #19 opened a year ago by smathev
  3

• Reading multiple tacho signals separate

  #15 opened a year ago by CzarofAK
  3

• Tacho connection in documentation

  #21 opened a year ago by janchlebek
  1

• Set the target temperature from an automation

  #20 opened 2 years ago by marxbenjamin
  3

• One console with two separate connected fans

  #18 opened 2 years ago by marxbenjamin
  2

• cool setup just what i was looking for but my fan does not shut off totally

  #2 opened 2 years ago by dartfrogdk
  4

• Offset ?

  #16 opened 2 years ago by jazzmonger
  0

• Problems using Dallas sensor

  #14 opened 2 years ago by jazzmonger
  9

• Reduce flash writes?

  #12 opened 2 years ago by TheDK
  4

• This is so cool! But...couple of questions?

  #10 opened 2 years ago by ChirpyTurnip
  19

• Cool project!

  #9 opened 2 years ago by jazzmonger
  3

• No longer able to compile.

  #7 opened 2 years ago by prokyle123
  3

• Fan Connector Type Doesn't Seem Right

  #3 opened 2 years ago by gcortes
  2

• Offline capability

  #6 opened 2 years ago by claib
  2

• No Integration in Home Assistant

  #4 opened 2 years ago by daschmidt1994
  0

• +/- in wiring

  #1 opened 3 years ago by der--flo
  2