riscvarchive/riscv-qemu

Issues

• How to trap in external interrupt while there is a keystroke

  #192 opened 6 years ago by LoveZJT
  0

• How can I found VIDEO BIOS Extensions information in riscv-qemu

  #193 opened 6 years ago by LoveZJT
  1

• frambuffer

  #194 opened 6 years ago by LoveZJT
  0

• Question about the pointer to framebuffer

  #188 opened 6 years ago by LoveZJT
  5

• Can't generate timer interrupt

  #190 opened 6 years ago by LoveZJT
  2

• interrupt

  #191 opened 6 years ago by LoveZJT
  0

• can't execute rdtime instruction

  #186 opened 6 years ago by LoveZJT
  1

• errno=Connection refused; Firewall blocks git://

  #189 opened 6 years ago by gojimmypi
  2

• PMP fail on boundary addresses because of size=0

  #185 opened 6 years ago by dayeol
  0

• The address matching based on PMP entry priority is ignored

  #184 opened 6 years ago by dayeol
  0

• Truncated register 16 in remote 'g' packet

  #180 opened 6 years ago by lbmeng
  12

• Some instructions' disassembly codes are not displayed correctly

  #179 opened 6 years ago by lbmeng
  7

• Read/write of CSR registers via GDB doesn't work

  #156 opened 6 years ago by sebhub
  1

• qemu-system-riscv32 doesn't run BBL/Linux

  #181 opened 6 years ago by mickflemm
  0

• the issue: qemu-system-riscv64: -nographic: unsupported machine type

  #177 opened 6 years ago by eleven121
  2

• gdb stub disassembler does not disassemble compressed instructions

  #178 opened 6 years ago by lbmeng
  8

• single float arith instructions don't produce NaN boxed output.

  #174 opened 6 years ago by jim-wilson
  3

• FreeRTOS singlestep issue

  #173 opened 6 years ago by arunthomas
  0

• qemu-system-riscv32 store doesn't modify the memory during a `sw ra, 12(sp)`

  #137 opened 7 years ago by vsiles
  18

• qemu-system-riscv64: -machine virt: unsupported machine type

  #171 opened 6 years ago by leeehui
  5

• linux-user riscv32 stat structure doesn't match glibc/musl

  #135 opened 7 years ago by michaeljclark
  9

• `0x00000000` decodes to `mv s0, sp`

  #147 opened 7 years ago by palmer-dabbelt
  2

• riscv pmp issues (fetch)

  #168 opened 6 years ago by wxjstz
  1

• riscv-qemu PMP function revise

  #172 opened 6 years ago by wxjstz
  1

• si does not stop to next instruction if current instruction is csrr/csrw in remote debug

  #170 opened 6 years ago by lbmeng
  2

• riscv pmp issues (address error)

  #169 opened 6 years ago by wxjstz
  2

• Add option to dump register state on simulation exit

  #161 opened 6 years ago by michaeljclark
  0

• qemu-user crash when mincore called with invalid pointer

  #158 opened 6 years ago by michaeljclark
  0

• WFI doesn't return when a IPI is issued

  #132 opened 7 years ago by atishp04
  9

• Hello-world user space not working in qemu and current gnu toolchain ?

  #148 opened 7 years ago by anon63github
  1

• PMP address bugs

  #149 opened 6 years ago by dayeol
  1

• Failed to load share library from specific library path

  #151 opened 6 years ago by furuame
  5

• User mode can access address which has a page table entry with U=0.

  #146 opened 7 years ago by LuChengTHU
  2

• Add RVE register bounds checks to Base ISA ('I'/'E') in translate.c

  #144 opened 7 years ago by michaeljclark
  0

• sifive_plic mismatch between pending and priority base address

  #142 opened 7 years ago by vsiles
  3

• RV64 mstatus/status: SXL and UXL are not correctly implemented

  #139 opened 7 years ago by vsiles
  2

• Why is '-nographic' required to use qemu ?

  #138 opened 7 years ago by vsiles
  2

• Drop writes to satp and return 0 when misa.S is set and no MMU is present.

  #113 opened 7 years ago by michaeljclark
  2

• Priv 1.10 should use *tval instead of *badaddr

  #125 opened 7 years ago by msuozzo
  2

• Populate mtval with instruction bytes on illegal instruction traps

  #141 opened 7 years ago by michaeljclark
  0

• Issue with the CSRRS instruction

  #140 opened 7 years ago by vsiles
  1

• I can't do git clone

  #134 opened 7 years ago by yosukezith
  1

• How to skip reset_vec execution before user program?

  #131 opened 7 years ago by sergeysmolov
  2

• Implement support for IEEE 754-201x minimumNumber/maximumNumber

  #111 opened 7 years ago by michaeljclark
  1

• Generate illegal instruction traps for s* CSR accesses if misa.S is not set

  #126 opened 7 years ago by michaeljclark
  0

• Don't generate exceptions for CSR access in gdbstub.c

  #127 opened 7 years ago by michaeljclark
  0

• Possible error in 'jal' insn implementation

  #128 opened 7 years ago by sergeysmolov
  10

• The continuity of this repo

  #121 opened 7 years ago by NonerKao
  2

• riscv linux-user should align stack to 16-byte boundary

  #129 opened 7 years ago by michaeljclark
  1

• Mask mie/mip fields depending on whether S mode is enabled (misa.S)

  #114 opened 7 years ago by michaeljclark
  0