AlessioMorale/unav2_hardware

Issues

• PA5/pin 21 is not 5V tolerant. Use PA0

  #6 opened 5 years ago by AlessioMorale
  0

• ICSP port

  #4 opened 5 years ago by gbr1
  0

• Commanding enable and standby supply via R13 needs to be removed

  #3 opened 5 years ago by AlessioMorale
  0

• BOOT0 polarity is inverted

  #1 opened 5 years ago by AlessioMorale
  0

• CAN port

  #5 opened 5 years ago by AlessioMorale
  0

• Ground plane below stm32 and gnd connections are sub-optimal

  #2 opened 5 years ago by AlessioMorale
  0