PetoiCamp/OpenCat

Issues

• Code for Bittle x

  #95 opened 2 months ago by yojo-o
  1

• Use gyro and ultrasonic eyes

  #93 opened 3 months ago by josephburnett
  1

• ardSerial.py suggestion

  #88 opened 7 months ago by gravesreid
  1

• Add support for Mistral

  #82 opened 10 months ago by tonilampela
  1

• Getting data from IMU data (such as YRP and Accelerators) on the main source

  #77 opened 10 months ago by Kakcalu13
  9

• Is there a way to disable the beep sound?

  #76 opened a year ago by Kakcalu13
  1

• pyUI/commonVar.py uses wrong paths for Linux

  #70 opened a year ago by nrwahl2
  2

• Petoi Bluetooth Adapter not compatible with NyBoard_V02 ?

  #67 opened a year ago by wack-back
  2

• Sketch too big for NyBoard V0_2

  #65 opened a year ago by wack-back
  2

• Adding to siri, but not work in siri.

  #47 opened a year ago by gscfwid
  2

• opencat app bug : Team: 网络连接已中断。

  #62 opened a year ago by xiguaABei
  2

• After uploading the code of OpenCat.ino Robot will not accept any new code.

  #64 opened a year ago by JEAPI-DEV
  3

• Can you configure a standard Python package format for setup.py?

  #60 opened a year ago by taotieren
  0

• Is it possible to remote-control precise Bittle gaits?

  #30 opened 2 years ago by slerman12
  19

• Can I make a deb package for OpenCat UI app?

  #39 opened a year ago by atzlinux
  1

• Changing the speed of "Walk"

  #36 opened 2 years ago by Jakob0330
  1

• compatible with "azure openai api"

  #45 opened 2 years ago by williamswang23
  0

• Wrong

  #44 opened 2 years ago by Fok922
  0

• very-long-line-length-in-source-file > 512

  #41 opened 2 years ago by atzlinux
  3

• wrong-path-for-interpreter /opt/anaconda3/envs/petoi/bin/python3

  #40 opened 2 years ago by atzlinux
  0

• Unable to upload code after bluetooth connection failed

  #42 opened 2 years ago by Getafix17
  10

• MU Camera using arduino IDE error

  #38 opened 2 years ago by Getafix17
  2

• Running the Firmware Uploader on a Raspberry PI does not work

  #34 opened 2 years ago by elgohary12
  1

• Example code for Task creation

  #33 opened 2 years ago by sam-tj
  1

• New serial code doesn't work with RPi hat

  #16 opened 2 years ago by sskorol
  10

• Source code in header files

  #27 opened 2 years ago by vChavezB
  1

• Is this a bug? I can't understand the logic here

  #32 opened 2 years ago by yaringal
  3

• Application crashes when using MacOS with M1

  #31 opened 2 years ago by ioulosve
  3

• Please make a stable release

  #26 opened 3 years ago by ImFstAsFckBoi
  2

• Bittle sometimes doesn't physically respond to Serial commands

  #19 opened 3 years ago by sskorol
  12

• Getting IMU data

  #20 opened 3 years ago by sskorol
  21

• Divide by zero

  #12 opened 3 years ago by DaveB1620
  2

• Understanding the format of a behavior: trigger axis

  #13 opened 3 years ago by durka
  2

• OpenCat.ino Sketch to big to compile

  #2 opened 4 years ago by loeweh
  14

• when upload OpenCat.ino the monitor stop with the following content

  #10 opened 4 years ago by gst6062825
  1

• WriteInstinct Missing Dependency

  #5 opened 4 years ago by Kenttleton
  2

• Incorrect servos behavior in calibration mode

  #4 opened 4 years ago by MrDobert
  1

• Nybble - Adding new skill: need to move zero from EEPROM to PROGMEM

  #3 opened 4 years ago by Troy-Chard
  10