URDF and SDF descriptions of Universal Robot 5 (UR5) robot with OnRobot RG2 gripper for Ignition and MoveIt2.
Inertial properties of all links are estimated with estimate_inertial_properties.py script, while assuming total mass of 18.4 kg (UR5) + 0.78 kg (RG2) and uniform density. This script also redistributes a portion of hand's mass to fingers due to internal mechanical coupling.
The SDF description also contains estimated dynamic parameters for joints. Note that these values are NOT based on real-life robot and should therefore be used with caution.
Kinematic model of gripper is simplified to include only a single actuated revolute joint per finger. The full model would include one actuated and two passive revolute joints, however, I could not achieve stable manipulation with that approach - #1 (contributions are welcome if you figure it out).
Build with colcon and source the environment to make URDF discoverable for ROS 2.
Export IGN_GAZEBO_RESOURCE_PATH to make SDF discoverable within the context of Ignition Gazebo.
export IGN_GAZEBO_RESOURCE_PATH=${PARENT_DIR}/ur5_rg2_ign:${IGN_GAZEBO_RESOURCE_PATH}Alternatively, you can just include the model from Ignition Fuel if you do not require the URDF description (or you use it from the official, e.g. from Universal_Robots_ROS2_Driver).
<include>
<uri>https://fuel.ignitionrobotics.org/1.0/AndrejOrsula/models/ur5_rg2</uri>
</include>ur5_rg2_ign
├── ur5_rg2 # Model directory compatible with Ignition Fuel
├─ meshes # Meshes for both SDF and URDF
├── collision # STL files for collision detection
└─ *.stl
└── visual # COLLADA files for visuals
└─ *.dae
├─ thumbnails # Thumbnails for Fuel
└─ *.png
├── model.config # Ignition model meta data
└── model.sdf # SDF description of the Ignition model
├── urdf
└── ur5_rg2.urdf # URDF description of the model for MoveIt2
├── CMakeLists.txt
└── package.xml # ROS2 ur5_rg2 description package `ur5_rg2_ign`