CMU-SAFARI/MQSim
MQSim is a fast and accurate simulator modeling the performance of modern multi-queue (MQ) SSDs as well as traditional SATA based SSDs. MQSim faithfully models new high-bandwidth protocol implementations, steady-state SSD conditions, and the full end-to-end latency of requests in modern SSDs. It is described in detail in the FAST 2018 paper by Arash Tavakkol et al., "MQSim: A Framework for Enabling Realistic Studies of Modern Multi-Queue SSD Devices" (https://people.inf.ethz.ch/omutlu/pub/MQSim-SSD-simulation-framework_fast18.pdf)
C++MIT
Issues
- 0
Bug in combining 2 uint32_t
#72 opened by De-Broglie-Programmer - 1
Bug in SIMPLE Caching Mechanism?
#60 opened by ranferarusamsung - 0
TSU_Prioirty_OutOfOrder
#65 opened by ogus05 - 1
Unusual running time
#64 opened by fengaining - 5
What Device_Number means?
#47 opened by DanlinJia - 0
Accidentally created this issue.
#63 opened by hsieh123 - 0
Address Indexing?
#61 opened by ranferarusamsung - 3
Preconditioning doesn't work properly.
#31 opened by SAM-ZY-2019 - 1
Integrate MQSim with gem5
#57 opened by minmin20028 - 0
Why there are so many memory leaks....
#59 opened by SimonNie98 - 0
- 0
- 0
- 0
- 0
Trying to set parameters for defining a proper workload to GC algorithms comparison
#52 opened by abolfazlamini - 4
microbenchmark: couldn't find the microbenchmark program that analyzes and estimates the real ssd's internal configuration
#39 opened by chenxuqiang - 4
OP ratio
#49 opened by ZiyangJiao - 2
in MQSim paper i had seen that fio generates the trace files but device number and address column is not generated in fio where can i find such a tool to do it. And Device Number is not used much in the code can i keep it random uniform
#51 opened by HrithikSampson - 3
SSD Device preconditioning started.......
#48 opened by xiaobuding-cx - 1
Get response time for each request?
#45 opened by DanlinJia - 3
MQSim only issue synthetic workload
#46 opened by DanlinJia - 5
- 2
- 0
SLC caching implementation
#35 opened by boyoung-sk - 0
Questions about repeating trace files
#15 opened by xinhuilin - 2
Retrieving Info on Specific Requests
#42 opened by gavin2059 - 6
FLIN scheduler
#36 opened by sac2019 - 4
gem5 integration
#16 opened by tmnvnbl - 1
NVMe Queue Arbitration (Flow priority)
#37 opened by joyantamishu - 1
Input files to repeat the experiments of Contention at CMT in the FAST 2018 paper.
#12 opened by zy-tough - 1
Simulation Stops earlier TPCC: requests serviced are way lower than requests generated
#30 opened by mishrap-ssi - 1
- 3
run syntax
#26 opened by sac2019 - 1
Preconditioning error
#20 opened by tmnvnbl - 2
problem about running the trace of Financial1
#14 opened by gdchenahu - 2
- 2
Flash_Block_Manager_Base.cpp
#22 opened - 1
- 0
Questions about Hybrid FTL
#32 opened by SAM-ZY-2019 - 1
How can I get "response time of EACH request"
#29 opened by joonsung90 - 1
Bandwidth saturated by SSD and not PCIe - Synthetic Workload Bandwidth cannot exceed value of 2GB
#17 opened by Mappouras - 1
Compilation failed in Linux (gcc-5)
#10 opened by hoangt - 2
Runtime error on Linux
#9 opened by NEETProduction - 1
- 0
minor xml tag error and some missing parameters
#6 opened by c-w-m - 1
can't run the simulator
#1 opened by guqiuyuan - 0
fast18/data-cache-contention workload parameters missing <Synthetic_Generator_Type>
#5 opened by c-w-m - 1
- 2