KumarRobotics/imu_vn_100

Issues

• IMU hardware trigger

  #24 opened 6 years ago by tiralonghipol
  4

• VN permission denied error when enabling binary mode

  #44 opened 3 years ago by berndpfrommer
  3

• ERROR: cannot launch node of type [imu_vn_100/imu_vn_100_cont_node]: Cannot locate node of type [imu_vn_100_cont_node] in package [imu_vn_100]. Make sure file exists in package path and permission is set to executable (chmod +x)

  #41 opened 3 years ago by hilarioaraujo
  2

• Unstable generated frequency

  #25 opened 5 years ago by Triocrossing
  17

• VN: Permission Denied

  #23 opened 6 years ago by nerdyneptunian
  5

• /imu: VN: Permission denied

  #7 opened 8 years ago by MahsaP
  5

• Error using this driver!!!

  #13 opened 7 years ago by vik748
  10

• Opertation time out.

  #20 opened 6 years ago by Garfield-kh
  4

• Changing SyncOutMode

  #21 opened 6 years ago by nerdyneptunian
  0

• Magnetic field messages publishing 0 values

  #19 opened 6 years ago by vik748
  0

• Coordinate system of imu output

  #17 opened 7 years ago by vik748
  1

• IMU rate consistently lower than setting

  #18 opened 7 years ago by arazdan
  2

• Noisy Linear Acceleration

  #16 opened 7 years ago by stackSmasher294
  3

• can not obtain high freuqnecy

  #15 opened 7 years ago by snakehaihai
  6

• /imu: VN: Permission denied

  #14 opened 7 years ago by stackSmasher294
  2

• using imu in case of dynamic motion

  #9 opened 8 years ago by sagniknitr
  0

• Initialize Vector Processing Engine of VN-100

  #8 opened 8 years ago by sagniknitr
  1

• Timeout

  #3 opened 8 years ago by versatran01
  13

• Suspicious shared_ptr

  #1 opened 9 years ago by versatran01
  1

• Broken diagnostic updater

  #2 opened 9 years ago by versatran01
  0