Issues
- 3
- 1
PX4 VTOL Support?
#634 opened by januarydev - 12
large battery capacity
#643 opened by umeloman - 0
- 1
DSHOT ESC Telemetry Display
#658 opened by WhompingWhale - 1
Crossfire Telemetry Display
#659 opened by WhompingWhale - 1
FormationFlight Support
#660 opened by WhompingWhale - 3
Helix VTX/OSD only black screen without OSD
#657 opened by aQuaplug - 1
Is there any support for saving to a FETTEC G4 FC
#655 opened by GenCodeInc - 1
- 1
Throttle value is 11% after arming
#653 opened by vgwit - 3
Baudrate change to 115200?
#654 opened by DangerD1024 - 2
Ardupilot and Matek Hardware Integration
#652 opened by WhompingWhale - 2
Requesting Addition of Additional Unit Support
#649 opened by dtmasetti - 1
Add fettec alpha support
#650 opened by hulandy - 7
- 30
Can Mr Steele PDB support be added?
#599 opened by sevet - 2
miniosd
#645 opened by ricardovalmeida - 2
KISS FC WITH BLHELI32 ESC
#642 opened by hulandy - 1
Activate AHRS using IMU on I2C port
#636 opened by modifaer - 1
minimOSD Vario with MS5611 GY63
#646 opened by tobif00 - 2
Mavlink Alt support
#635 opened by RMFPV - 9
Mavlink OSD - some modes has wrong names
#638 opened by RMFPV - 8
MicrominimOSD with Inav
#637 opened by MsnSazabi - 3
multiwii2.4-baro alt displays 0
#633 opened by wleagle - 12
FC passthrough not working with Kiss
#627 opened by AngusCox - 1
Betaflight with MWOSD 1.9.2.0 and no able to bring up BF Config screen (left Stick) on OSD
#628 opened by c172jeff - 1
flight one falcox support
#626 opened by ludxio - 9
RPW PID for INAV
#621 opened by Drone-pilot - 4
single cell average voltage
#625 opened by corrado-c - 2
Help garbage font of mwosd 1.9.2
#622 opened by abimaputra78 - 5
Some ideas for GUI improvement.
#624 opened by RMFPV - 2
Feature request - load/save current screen layout
#623 opened by RMFPV - 3
Mwosd current reading for kiss
#619 opened by hulandy - 0
Did not receive reg key.
#620 opened by Oeble1966 - 2
Direct current sensor reading problem
#618 opened by hulandy - 1
Is glidescope in the good way
#617 opened by Benoit3 - 3
betaflight4.2 compatibility
#616 opened by corrado-c - 19
- 8
- 1
# enhancement Gui - auto scroll to selected element
#614 opened by RMFPV - 2
Can VTX power and/or Channel information be added?
#602 opened by sevet - 5
Display armed timer
#603 opened by sevet - 9
- 1
Garbage fonts
#598 opened by Tofandel - 3
- 0
Speed is overestimated. Arduplane 4.0.4
#594 opened by hyperion11 - 1
MinimOSD video voltage issue...
#590 opened by maRCnh33 - 5
Setting serial speed
#592 opened by thetiana - 1
mwosd break pixracer wifi telemetery
#591 opened by hyperion11