ipbus/ipbus-firmware
Firmware that implements a reliable high-performance control link for particle physics electronics, based on the IPbus protocol
VHDLNOASSERTION
Issues
- 3
- 25
- 2
IPbus slave icap_us_usp gives data_valid always zero
#242 opened by mkrivda - 5
Design not properly held in reset
#238 opened by LukasGibeh - 0
Use of VHDL-2019 Interfaces
#240 opened by DavidMonk00 - 3
IPBus read-out
#231 opened by aranzaba - 1
Source IP in DHCPDISCOVER packets
#229 opened by LukasGibeh - 2
IPBus options with Zynq
#228 opened by aranzaba - 7
"ipbb ipbus gendecoders" does not work
#221 opened by abunickabhi - 1
The k800_xdmaBypass example project is broken
#205 opened by jhegeman - 0
Race condition in ipbus_syncreg_v
#189 opened by dmnewbold - 2
- 0
Addition of notes on ipbus_syncreg_v
#214 opened by dmnewbold - 0
- 1
IPBus on a Zynq FPGA
#209 opened by andrea-celentano - 0
- 3
DHCP support
#207 opened by mwensing - 0
ZCU 102 example LEDs debug leds
#196 opened by alessandrothea - 0
Remove enclustra files
#192 opened by alessandrothea - 12
Detected runs in ERROR temac_gbe_v9_0_synth_1, gig_ethernet_pcs_pma_basex_156_25_synth_1
#190 opened by giacomoCucciati - 1
ipbus-firmware link changed
#188 opened by shu-soleil - 17
addr_sign in udp_tx_mux stuck for some clk cycles - development for Intel Stratix 10 MX
#186 opened by AleCamplani - 1
Request: add constant specifying IPBus word size
#178 opened by jhegeman - 1
- 0
- 1
IPBus web site is unreachable
#181 opened by jhegeman - 0
ipbus slave with sticky bits
#179 opened by mkrivda - 5
zcu102_basex project ... which version of vivado was this originally built with?
#177 opened by kjazatlas - 3
- 1
- 6
Address decoder generator help needed
#174 opened by jhegeman - 0
Missing dependency in ipbus_freq_ctr.dep
#171 opened by jhegeman - 1
Minor cleanup in ipbus_transport_multibuffer_if.vhd to avoid Vivado synthesis 'critical warning'
#164 opened by jhegeman - 5
Missing 'id' attribute in opencores_i2c.xml
#162 opened by jhegeman - 0
- 3
- 1
Bug in constraints file for Enclustra AX3
#166 opened by DavidCussans - 2
- 4
- 1
Cleanup suggestion: separate 'core dep files' for Ethernet- and PCIe-based access
#140 opened by jhegeman - 2
- 2
Add dep file for ipbus_ctrlreg_v
#142 opened by jhegeman - 7
- 1
Cleaning up the slave directory
#148 opened by tswilliams - 2
DRP addresses in drp_decl are too narrow
#150 opened by jhegeman - 1
- 1
Broken dependency files
#154 opened by tswilliams - 1
- 3
Genesys2
#139 opened by barryoakgreen - 2
Bug in ipbus_example address table
#130 opened by jhegeman