neufieldrobotics/spinnaker_sdk_camera_driver

Issues

• catkin_make fails due to opencv error

  #159 opened a year ago by ana-lan
  3

• Recording actual timestamp value at which image captured

  #157 opened 2 years ago by ajay1606
  0

• Software triggering of BFS camera's using timestamp value

  #144 opened 2 years ago by ajay1606
  2

• Failing to Launch node in docker container

  #154 opened 2 years ago by KopiousKarp
  2

• Cannot Trigger Flir Blackflys USB3 Cameras since transger to noetic driver

  #155 opened 2 years ago by Hateley123
  0

• Where to find trigger_msgs package?

  #146 opened 3 years ago by maghauke
  3

• Failed to load nodelet '/acquisition_node` of type `acquisition/Capture` to manager `vision_nodelet_manager'

  #156 opened 2 years ago by zhuoyuan00
  0

• Failed to load nodelet '/acquisition_node`

  #153 opened 2 years ago by AnnaVerbe
  0

• Failed waiting for EventData on NEW_BUFFER_DATA event. [-1011]

  #150 opened 2 years ago by AshleySpartan
  0

• Unable to set PixelFormat to BGR8

  #148 opened 3 years ago by nicetryzz
  1

• Jetson Xavier turns off when using two cameras (in external triggering mode)

  #147 opened 3 years ago by maghauke
  0

• Share pip wheels for spinnaker SDK 2.2.0.48

  #145 opened 3 years ago by goloskokovic
  0

• ASSERTION FAILED Error while launch

  #139 opened 3 years ago by ajay1606
  22

• Failed to load nodelet

  #122 opened 4 years ago by fys445089968
  4

• Failed to load nodelet '/acquisition_node` of type `acquisition/capture_nodelet` to manager `vision_nodelet_manager'

  #108 opened 4 years ago by dostyaaa
  8

• Jetson AGX Xavier - Unable to capture synchronised shutter using master configuration

  #143 opened 3 years ago by jwurts-mitre
  1

• Image incomplete with image status 9.

  #140 opened 3 years ago by Xulei-Zhai
  0

• First frame ID was not zero./Error: Spinnaker: GenIcam::OutofRangeException = Value = 1 must be equal or greater than 2

  #138 opened 3 years ago by Xulei-Zhai
  12

• Spinnaker SDK reinstall needed for each launch.

  #125 opened 3 years ago by lincolnkinley
  4

• ROS publish rate is significantly below camera framerate

  #128 opened 3 years ago by rgov
  9

• Cannot launch node of type [spinnaker_sdk_camera_driver/acquisition_node]

  #137 opened 3 years ago by mankinb
  2

• Cannot launch node as normal user, but can launch as root

  #129 opened 3 years ago by civerachb-cpr
  5

• Unable to execute trigger. Aborting...

  #135 opened 3 years ago by Karthikeyanc2
  5

• How to change the frequency of the camera?

  #119 opened 3 years ago by helloworld202
  1

• Does the camera support PTP time synchronization?

  #123 opened 3 years ago by fys445089968
  3

• How to make camera calibration

  #124 opened 3 years ago by Keddie-yang
  2

• how to grab image in my project using this project?

  #126 opened 3 years ago by Devoe-97
  2

• unable to relaunch the node after shutting it down

  #95 opened 4 years ago by rishabhkjain
  5

• Building on Jetson AGX Xavier running Jetpack 4.3 (Ubuntu 18.04)

  #89 opened 4 years ago by rishabhkjain
  4

• Error: unable to set BinningHorizontal to 1 (ptr retrieval)

  #127 opened 4 years ago by nicewiz
  10

• Catkin_make error

  #120 opened 4 years ago by Keddie-yang
  5

• Spinnaker: GenICam::AccessException= Node is not writable

  #80 opened 4 years ago by Benefe
  25

• Spinnaker 2.3.0.77: Segmentation fault upon creating system instance

  #106 opened 4 years ago by rgov
  12

• Path to Spinnaker SDK is hardcoded, Spinnaker.h not found

  #105 opened 4 years ago by rgov
  2

• catkin_make

  #103 opened 4 years ago by YangHanj
  5

• Failed to load nodelet and parameters with dev/external trigger branch

  #107 opened 4 years ago by oysteinvolden
  8

• camera ******** not detected !!!

  #104 opened 4 years ago by YangHanj
  2

• Numer of cameras found: 1 but it can not detected.

  #98 opened 4 years ago by 708949503
  6

• How to reduce CPU load

  #102 opened 4 years ago by WSTao
  0

• Camera not detected as being in config list

  #101 opened 4 years ago by ab3nd
  1

• Unable to complete catkin_make, able to launch and connect camera to spinview

  #100 opened 4 years ago by jbwurts
  4

• Failed to load nodelet '/bfy/acquisition_node`

  #99 opened 4 years ago by hongyi12
  1

• how to publish raw Img,not Compressed image

  #94 opened 4 years ago by ZhouSongxin
  12

• Warning of passing a NULL to non-pointer

  #78 opened 4 years ago by Benefe
  4

• No camera found while retrieving list of cameras

  #88 opened 4 years ago by keerthana-kannan
  22

• Cannot detect Camera

  #76 opened 4 years ago by atifkarim
  23

• Multi-cam in acquisition.launch not initializing

  #86 opened 4 years ago by capaulson
  9

• flip image, Camera not detected, frame id was zero, NEW_BUFFER_DATA

  #87 opened 4 years ago by wwstory
  2

• Unable to Configure it correctly

  #85 opened 4 years ago by soulslicer
  3

• Encountering Spinnaker SDK issue: Spinnaker: Failed waiting for EventData on NEW_BUFFER_DATA event [-1011]

  #75 opened 5 years ago by irispete
  2