Issues
- 14
- 5
Vivado 2019.2 doesn't support xsim DDR4 model:
#906 opened by grg-haas - 18
Generation of the IP CORE failed.
#934 opened by sysy007uuu - 3
CAPI2.0 SNAP actions hang on certain linux kernels
#792 opened by luyong6 - 5
There is no '/sys/class/cxl*'
#898 opened by lis123kr - 21
Action hangs while writing on DDR
#887 opened by abbasBSC - 5
ERROR: [Vivado_Tcl 4-78] Error(s) found during DRC. Opt_design not run.
#900 opened by myheartisweeping - 0
- 10
More than one action on the same FPGA card
#884 opened by abbasBSC - 3
Cannot simulate with QuestaSim
#891 opened by BasF0 - 4
Action software.mk clean modification
#893 opened by davidmin7 - 3
- 1
- 5
- 2
Waiting for an interrupt is much longer than polling a register at the end of a test (CAPI2.0 only)
#885 opened by bmesnet - 4
- 2
- 4
- 2
Ignoring #pragma to allocate uram on HLS action and using bram instead w/ AD9V3
#862 opened by diamantopoulos - 1
- 2
Wrong header information displayed with snap_maint -vv when Cloud build option is enabled
#845 opened by bmesnet - 1
Support simulating SNAP actions using Vivado WebPACK
#821 opened by rs22 - 5
- 6
- 3
hdl_helloworld enhancements
#820 opened by bmesnet - 8
hls_helloworld sim error on N250SP
#686 opened by joergkayser - 6
make clean conflicts with per action "user IP"
#798 opened by david-mle - 11
CAPI2.0 snap_core sends 'U' to ah_cea
#789 opened by luyong6 - 7
SNAP config is corrupted by 'make image'
#797 opened by david-mle - 4
dma_fsm_q stuck at ST_DMA_WRITE_REQ
#801 opened by shgoupf - 6
IP cores generated by Vivado HLS not automatically included in SNAP project
#802 opened by TomHogervorst - 3
Vivado 2018.2: NVMe module synthesis fails
#772 opened by rs22 - 1
Missing Signed-Off: Add checking for pull requests
#767 opened by jsvogt - 9
SR10441909: xsim: writememh() works in combination with sformat() and readmemh() does not
#766 opened by fhaverkamp - 1
- 3
snap_env doesnt work without DCP defined
#773 opened by joergkayser - 1
Integrate AXI protocol checkers
#756 opened by johanpel - 0
NVMe: High-level model for SNAP NVMe Support multiple operations in parallel
#739 opened by fhaverkamp - 0
NVMe: high level model - review findings
#748 opened by boekholt - 1
Simulation with XSIM and a coredump in the end
#720 opened by luyong6 - 4
NVMe: High-level model for SNAP NVMe Support
#736 opened by fhaverkamp - 11
- 3
Model: make model fails and succeeds after retry
#765 opened by fhaverkamp - 8
cloud doesnt open GUI with 'make snap_config'
#726 opened by joergkayser - 2
hls_sponge action build fails for xcku15p
#755 opened by boekholt - 4
- 4
- 4
- 2
SNAP SW: Add DMA size and Align
#717 opened by ibm-genwqe - 1
SNAP Action: Support for N250SP
#711 opened by ibm-genwqe